| Customization: | Available |
|---|---|
| Type: | Mask |
| Material: | Plastic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item Name | CPAP mask |
| Material | PC for hard plastic components, Silicone for cushion and valve. |
| Color | White |
| Application | This mask is designed for use with CPAP or Bi-level systems recommended by your health are professional or respiratory therapist. |
| Size | M & L |
| Packing | 1Piece mask , Belt and Use instruction /PE Bag , 50pcs/Carton |
| Certification | CE and ISO13485 |
1.This mask is not suitable for providing life support ventilation.
2.This mask is designed for use with CPAP or Bi-level systems recommended by your health are professional or respiratory therapist.
3. Do not wear this mask unless the CPAP or Bi-level system is turned on and operating properly.
4. Do not block or try to seal the exhalation port.
5.If oxygen is used with the device, the oxygen flow must be turned off when the device is not operating.
Note: When the device is not in operation, and the oxygen flow is left on, oxygen delivered into the ventilator robing may accumulate within the device enclosure. Oxygen accumulated in the device enclosure will create a risk of fire. Oxygen supports combustion. Oxygen should not be used while smoking or in the presence of an open flame.
6. At a fixed flow rate of supplemental oxygen flow, the inhaled oxygen concentration will vary, depending on the pressure, settings, patient breathing pattern, mask selection, and the leak rate. This warning applies to most types of CPAP and Bi-level machines.
7. At low CPAP or BPAP pressures, the flow through the exhalation port may be inadequate to clear all exhaled gas from the tubing. Some re-breathing may occur.
8. The patient's physician should be contacted if the patient experiences the following symptoms while using the mask or after removing it : Unusual chest discomfort, shortness of breath, stomach distension, belching, or severe headache drying of the eyes, eye pain, or eye infections blurred vision. (Consult a doctor if symptoms persist.)
CONTRAINDICATIONS
The CPAP Mask may not be suitable for some people. Please do not use the item on patients with the following conditions:
1. Excessive gastroesophageal reflux
2. Impaired cough reflex
3. Hiatal hernia
4. Impaired cardiac sphincter
The mask should also not be used on patient who is uncooperative, obtunded, unresponsive or unable to remove a mask.
DO NOT store the mask under direct sunlight.
OPERATION
1. Remove plastic packaging from CPAP mask.
2. Attach the upper strap to the ring hook of the mask.
3. Hold the mask base in one hand, expand the Headgear with your free hand just enough to fit comfortably over your head
4. Lightly hold the mask against your face and spread the Headgear over your head.
5. Gently adjust the top horizontal straps to ensure the mask sits comfortably and securely on the face.
6. Gently adjust the top crown straps as needed.
7. Connect the CPAP machine hose running at prescribed pressure to the mask.
8. If necessary, attach the oxygen supply or pressure sensing device to the side port on the elbow connector of the mask.
CLEANING
To ensure the continuous safety and comfort of your CPAP Mask:
DO NOT clean the mask in the dishwasher.
DO NOT clean the mask with alcohol, chlorine or bleach.
Before each use
1.Inspect the mask for deterioration. Do not use if appears aged or damaged.
After each use
1. Disassemble the mask and Headgear.
2. Wash the mask and Headgear in warm soapy water then rinse them in fresh water.
3. Keep it dry and away from direct sun light.
SPECIFICATIONS
1. Material: PC for hard plastic components, Silicone for cushion and valve.
2. Dimension: 22mmOD, according to IS0 5356-1.
3. Operation Temperature: -18ºC~ 40ºC.
4. Storage Relative Humidity: <95%
5. Storage Temperature: -20ºC~ 60ºC
6. Validity: 2 years
Packing: 1Piece mask + Belt + Instruction / PE bag , 50Pieces /Carton ;
For more information, welcome to contact us .Thank you !
){kind=link}